• Industry leading 3 YEAR WARRANTY

• Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!

• CE Certified Lift Structure and Hydraulic System - Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity

• One Set of 4" Tall Truck Adapters Included; 6'9" Lift Height Maximum with Truck Adapters

• All Robot Welded Structure with Durable Powder Coated Finish

APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double "S" column design to support 10,000 LB capacity.

Specifications

Lifting Capacity    10,000 LB    10,000 LB

Overall Height    143 3/16"    143 3/16"

Overall Width    134 5/16"    134 5/16"

Maximum Lift height with Truck Adapters    81"    81"

Maximum Lift height without Truck Adapters    75"    75"

Minimum Height of Adjustable Pads from Ground    4"    4"

Drive Through Width (Carriage to Carriage)    100"    100"

Column to Column Width    109"    109"

Column Cross Section    11"L x 7"W    11"L x 7"W

Driving Mode    Dual hydraulic cylinders, chain drive    Dual hydraulic cylinders, chain drive

Motor    220V Single Phase 3HP 10A (recommend a 30A breaker)    220V Single Phase 3HP 10A (recommend a 30A breaker)

Hydraulic Oil    3-5 gallons AW32/AW46 (Not Included)    3-5 gallons AW32/AW46 (Not Included)

Time to full rise    50 seconds    50 seconds

Shipping Weight    1470 LB    1400 LB and 120 LB

Shipping package size    113"L x 22"W x 40"H    

113"L x 22"W x 40"H (Car Lift)

38"L x 17"W x 14"H (2ft Height Extension Crate)

Concrete Requirement    6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below)

Parts Included    

4 pieces of adjustable screw pads

4 pieces of 4" tall truck adapters (height extensions)

10 anchor bolts

10 shims

2 tool trays

2 toe guards

Optional Parts    2 3/4" and 6" Tall Truck Adapters

Arm Assembly    Combo (Symmetrical and Asymmetrical) Arm Assembly

Front Arms    Straight Front 3 Stage reach from 22 7/8" to 42 5/8"

Back Arms    Straight Rear 2 Stage reach from 33 5/8" to 52 7/8"

Column Steel Thickness    13/64"

Carriage Steel Thickness    15/64"

Carriage Yoke Thickness    9/16"

Arm Steel Thickness    15/64"

Base Plate Steel Thickness    5/8"

Features

• CE Certified Lift Structure and Hydraulic System
• Third party tested with a dynamic load capacity of 115%
• Third party tested with a static load capacity of 150%
• Durable hydraulic system
• Easy to operate and maintain
• Double point safety lock release
• Double Seal Rings Protecting PU Material
• Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
• Lifting operation by pressing "UP" button on motor
• Manual lowering operation by pressing lever
• Relief valve built in power pump to prevent overloading
• Automatic arm lock restraints
• Relief valve built in power pump to prevent overloading
• Door guards protection rubber
• Up-limit switch to protect cylinders working stroke used in safe length scope
• Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
• Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down